AMERICAN STANDARD STEEL BUILDING SYSTEMS

The purlin bearing rib (PBR) panel is an attractive and economical option for your steel building. This exposed fastener system can be used in both roof and wall applications. This panel system can even provide diaphragm support to the buildings structure. 

Available in 26 and 24ga, 22ga panels available upon request. 

The AVP panel produces a decorative shadow line, creating a distinctive architectural effect with semi-concealed fasteners. Ribs are 1 1/8” deep and major corrugations spaced 12” on center. The net coverage of panel is 3’-0”. This panel can be used as wall application, as well as a soffit panel. 

Available in 26ga or 24ga. 

The shadow rib panel combines aesthetics, economics, and function to bring definition to metal structures. This panel is a proven performer and a versatile tool to the designer. Structural strength in the shadow rib panel is accomplished without sacrificing appearance or design flexibility. The fluted face creates distinctive shadow lines. This panel features a concealed fastener application, which provides a very sleek and modern look. 

The shadow rib panel can be used for walls, fascias, and equipment screens. Apply the panel over light-gauge framing, purlins, girts, structural steel, and joists. 

Available in 26ga, 24ga, and 22ga is available on request. 

The Santa Fe insulated metal wall panel has a flat exterior profile with a heavy embossed stucco texture that mimics the look of a masonry stucco finish. In addition, all of our insulated panels come with an interior liner panel, providing an attractive finished look on the inside of your building. 

Superior insulating value across the entire wall and roof area is ensured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lower heating and cooling costs. 

One-piece construction process ensures rapid completion of the wall and roof system. Factory-fabricated composite panels are attached directly to the supporting structure, and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. 

R values for our insulated panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 20.49 
• 4” = 29.42 

The versatility of the LS-36 insulated metal roof and wall panel offers a multitude of design options. The overlapping through fastened joint allows for quick installation in roof or wall applications that results in reduced labor costs and earlier business starts. Owners will also appreciate the energy cost savings that an insulated metal panel provides. 

 Superior insulating value across the entire wall and roof area is ensured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lower heating and cooling costs. 

One-piece construction process ensures rapid completion of the wall and roof system. Factory-fabricated composite panels are attached directly to the supporting structure, and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. 

R values for our insulated panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 20.49 
• 4” = 29.42 

The ribbed profile of the Metl-Span CF Flute insulated metal wall panel provides bold vertical lines complementary to almost any commercial or industrial building. The CF Flute wall panel is the recommended profile for the exterior of cold storage buildings. 

Superior insulating value across the entire wall and roof area is ensured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lower heating and cooling costs. 

One-piece construction process ensures rapid completion of the wall and roof system. Factory-fabricated composite panels are attached directly to the supporting structure, and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. 

R values for our insulated panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 20.49 
• 4” = 29.42 

The architectural/horizontal insulated metal wall panel is ideal for high-profile horizontal applications. Designed to install with concealed clips and fasteners in the side joint. 

Architectural/horizontal wall panels provide maximum design flexibility and a beautiful high-tech appearance. The horizontal interlocking joint can be varied for visual impact. It may be ordered flush or with a 3/8” deep reveal of 1/4”, 1/2”, 3/4”, 1”, 1 1/2”, 2”, 2 1/2”, or 3” width. The panel ends are folded to eliminate the need for metal trim at the vertical butt joint. The joint is sealed with a black dry gasket to create a shadow line effect that can be emulated in the horizontal reveal. 

Superior insulating value across the entire wall and roof area is ensured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lower heating and cooling costs. 

One-piece construction process ensures rapid completion of the wall and roof system. Factory-fabricated composite panels are attached directly to the supporting structure, and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. 

R values for our insulated panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 20.49 
• 4” = 29.42 

The purlin bearing rib (PBR) panel is an attractive and economical option for your steel building. This exposed fastener system can be used in both roof and wall applications. This panel system can even provide diaphragm support to the buildings structure. 

Available in 26 and 24ga, 22ga panels available upon request. 

Ultra-Deck is a 24” net coverage metal standing seam roofing product attached by using a variety of concealed, interlocking clips that provide minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. The Ultra-Deck panel is designed to provide a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E1680 and E1646 (for air infiltration and water penetration). 

The Ultra-Deck panel is the most economical option for standing seam roof systems. This system is a snap-lock system, which does not require an electrical seaming tool. Furthermore, the 24” net coverage panel allows for faster installation, keeping construction costs down. 

Available in 24ga standard, 22ga panels are available upon request. 

Double-Lock is a 24” net coverage metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide minimum panel penetrations. Double-Lock panels can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift). 

The Double-Lock roof is ideal for roof pitches 3:12 or lower. 

A unique feature of the BattenLok® panel is a vertical leg side joint that is mechanically seamed with an electric seamer for a weathertight finish. This panel features concealed clips and easy-to-handle 16” or 12” wide panels custom-cut to the desired length. BattenLok® can be installed directly over purlins or bar joists. It does not require a solid substructure for support. This roof system has several different UL® 90 construction numbers. 

The BattenLok® panel is ideal for roof pitches 3:12 and steeper. 

The SuperLok® 16” standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. This panel has earned uplift ratings that are the highest in the industry for standing seam roofs, ensuring the reliability of performance. This panel is FM Global-approved to satisfy stringent code requirements and is ICBO-approved. 

Available in standard 24ga, 22ga panels available upon request. 

The versatility of the LS-36 insulated metal roof and wall panel offers a multitude of design options. The overlapping through fastened joint allows for quick installation in roof or wall applications that results in reduced labor costs and earlier business starts. Owners will also appreciate the energy cost savings that an insulated metal panel provides. 

Superior insulating value across the entire wall and roof area is ensured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lower heating and cooling costs. 

One-piece construction process ensures rapid completion of the wall and roof system. Factory-fabricated composite panels are attached directly to the supporting structure, and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. 

R values for our insulated roof panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 22.27 
• 4” = 29.42 
• 5” = 36.56 
• 6” = 43.71 

The CFR is an insulated metal standing seam roof panel and is the foremost innovation in all-in-one composite panel design, combining durable interior and exterior faces with Metl-Span’s unmatched polyurethane core. 

The CFR roof panel provides exceptional benefits, including a standing seam exterior face for unsurpassed weathertight performance and panel widths contributing to installation savings because there are fewer side joints to seal. CFR roof panels are installed completely from the top side with concealed clips and fasteners placed in the side joint. Cold storage applications may require alternate methods of attachment. Factory-cut panel ends, factory notching, and factory-swaged ends eliminate critical and extensive field reworking and reduce erection costs. Factory-installed backer plates at the end laps also eliminate pre-drilling for special fasteners and fastener tools. 

The panel comes in either 30”, 36”, or 42” net coverage, which provides for extremely fast installation. 

R values for our insulated roof panels: 

• 2” = 15.14 
• 2.5” = 18.71 
• 3” = 22.27 
• 4” = 29.42 
• 5” = 36.56 
• 6” = 43.71