American Standard Steel Building Systems

Standard Roof Panels

	PBR Panel: The purlin bearing rib (PBR) panel is an attractive and economical option for your steel building. This exposed fastener system can be used in both roof and wall applications. This panel system can even provide diaphragm support to the buildings structure. Available in 26 and 24ga, 22ga panels available upon request. Click here for available colors: Full Color Chart.pdf
	Ultra Deck Standing Seam Roof Panel: Ultra-Deck is a 24" net coverage metal standing seam roofing product attached by using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. The Ultra-Deck panel is designed to provide a high degree of weather tightness and has been tested by independent laboratories in accordance with ASTM E1680 and E1646 (for air infiltration and water penetration). The Ultra-Deck panel is the most economical option for standing seam roof systems. This system is a snap-lock system which does not require an electrical seaming tool. Further, the 24" net coverage panel allows for faster install, keeping construction costs down. Available in 24ga standard, 22ga panels are available upon request. Click here for available colors: Full Color Chart.pdf
	Double Lock Standing Seam Roof System: Double-Lock is a 24" net coverage metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. Double-Lock panels can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weather tightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift). The double lock roof is ideal for roof pitches 3:12 or lower. Click here for available colors: Full Color Chart.pdf
	Batton Lock Standing Seam Roof System: A unique feature of the Batten Lock panel is a vertical leg side joint that is mechanically seamed with an electric seamer for a weathertight finish. This panel features concealed clips and easy to handle 16" or 12" wide panels custom cut to the desired length. Batten Lock can be installed directly over purlins or bar joists. It does not require a solid substructure for support. This roof system has several different UL® 90 construction numbers. The batton lock panel is ideal for roof pitches 3:12 and steeper. Click here for available colors: Full Color Chart.pdf
	Super Lock Standing Seam Roof System: The Super Lock 16" standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. This panel has earned uplift ratings that are the highest in the industry for standing seam roofs, assuring the reliability of performance. This panel is FM Global approved to satisfy stringent code requirements and is ICBO approved. Available in standard 24ga, 22ga panels available upon request. Click here for available colors: Full Color Chart.pdf
	LS36 Insulated Panel: The versatility of the LS-36 insulated metal roof and wall panel offers a multitude of design options. The overlapping, through fastened joint allows for quick installation in roof or wall applications that results in reduced labor costs and earlier business starts. Owners will also appreciate the energy cost savings that an insulated metal panel provides. Superior insulating value across the entire wall and roof area is assured with insulated panels. The advanced polyurethane core provides enhanced insulation values that significantly lowers heating and cooling costs. One-Piece Construction process assures rapid completion of the wall and roof system. Factory fabricated composite panels are attached directly to the supporting structure and the multiple steps to construct the traditional field insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs. R values for our insulated roof panels: 2" = 15.14 2.5" = 18.71 3" = 22.27 4" = 29.42 5" = 36.56 6" = 43.71 Click here for available colors: Full Color Chart.pdf
	CFR Insulated Standing Seam Roof Panel: The CFR is an insulated metal standing seam roof panel, and is the foremost innovation in all-in-one composite panel design, combining durable interior and exterior faces with Metl-Span's unmatched polyurethane core. The CFR roof panel provides exceptional benefits including a standing seam exterior face for unsurpassed weather tight performance, and panel widths contributing to installation savings because there are fewer side joints to seal. CFR roof panels are installed completely from the top side with concealed clips and fasteners placed in the side joint. Cold Storage applications may require alternate methods of attachment. Factory cut panel ends, factory notching and factory swaged ends eliminate critical and extensive field reworking and reduce erection costs. Factory installed backer plates at the end laps also eliminate pre-drilling for special fasteners and fastener tools. The panel comes in either 30", 36", or 42" net coverage which provides for extremely fast install. R values for our insulated roof panels: 2" = 15.14 2.5" = 18.71 3" = 22.27 4" = 29.42 5" = 36.56 6" = 43.71 Click here for available colors: Full Color Chart.pdf